Autobahn Motorsports Terms and Conditions
1. Acceptance of Order
All orders are subject to acceptance by Autobahn Sales representative. Our acceptance shall not be construed as an acceptance of printed terms and condition on the purchase order from of the buyer, hereunder ("Buyer"), that are inconsistent with or additional to our terms and conditions, unless specifically in writing by our authorized officer. No sales representative, agent or employee of our company is authorized to alter, vary, or waive any of these terms and conditions, Such as require the written approval of our authorized officer.
2. Shipping Damages
Some products may be damaged during transit. Inspect all packages immediately in the presence of the delivery person. Do not sign delivery receipt until all packages have been inspected. In the event that damage has occurred, note the specific damage on the delivery bill and have the delivery person sign it as verification. Retain all boxes and other packaging material as package may be subject to inspection by the carrier.Call Autobahn Motorsports within 24 hours to file a claim request. Failure to comply with this policy may result in a denial for damage claim.
Our prices do not include any present or future sales, use, excise or other municipal, state, or federal taxes. Consequently, in addition to prices specified herein, the Buyer agrees to reimburse us for any and all taxes which may become payable with respect to this transaction.
We shall deliver goods F.O.B. point of shipment with transportation charges prepaid, via lowest cost routing to destination, unless otherwise specified by Buyer. We shall deliver the goods, as soon as possible after receipt of the order; however, the stated time of delivery is an estimate only, and we shall not be liable for delayed delivery or non-delivery caused by strikes, lockouts, fires, accidents, war, riots, a shortage of or an inability to obtain material, supplies, fuel, labor or shipping facilities, and on account of any acts, demands, orders or regulations of the municipal, state or federal governments, and any departments or agencies thereof, whether or not legally binding on us, or for delayed delivery or non delivery caused by any contingency beyond our reasonable control. Our time for making delivery shall not be extended for the duration of any such delays, except that if any such delay extends for more than six months, we shall have the option of canceling the undelivered portion of the order. In no event shall the contract of sale be subject to cancellation by the Buyer as a result of delays in delivery or for any other cause, except by mutual, written agreement of the parties. Shipping charges and handling fees are non-refundable.
5. Product Warranty
Customer must read and agree to the following terms and conditions concerning body kits and aerodynamics before proceeding.
Body Kit / Aero-Dynamics: Buyer fully understands that all body kits are sold "as is" with no warranty expressed or implied; due to the fact that most body kits are made of 100% fiberglass and most are imported from Asia (Japan / China / Taiwan / Korea). Buyer also understands that due to strict U.S. Federal and State Safety crash guidelines, Autobahn Motorsports is not responsible or liable for any damages or possible injury incurred upon possible accidents due to driver error, incorrect installations, bad judgment (cracking or breaking your aero parts) or act of nature / God, Allah, Jehovah, Buddah, etc... All body kits (aero components) are only recommended and legal to be used for off-highway use such as track racing or for exhibition show only! Buyer understands that all body kits (aero components) may need modifications for correct fitment such as removal of safety reinforcements, removal of factory bumper lights/side marker indicators, shaving, molding, etc. Because several of these kits are prototyped and used on NON-USA vehicles that have much less safety standards/requirements in their respected country of origin. Buyer understands that all body kits (aero components) require some prep work before paint; we are not responsible for any extra incurred fees, material fees, storage fees for unexpected labor your body shop/paint shop charges the Buyer. We strongly RECOMMEND you only have highly skilled body shop/ technician install and paint any body kit (aero components) for factory or show quality look. Not all body shops charge the same prices, or have the same quality work performed. We find that you get what you pay for! If local in So. Calif. or delivering vehicle to So. Calif. we work with paint/body shops that we can recommend body/paint work to be performed. Buyer understands eRacings is not responsible or liable for any vehicle delivery fees, transportation costs, towing fees, or incurred damages for bringing vehicle to So. Calif for installation, paint and/or body modifications. If any aero part(s) arrive damaged or cracked bad enough it cannot be repaired, you must contact Autobahn Motorsports immediately in order for claim to be processed and approved. Please refer to Shipping / Handling section of this page for further details involving claims. (Please continue to scroll down)
Aftermarket Lightweight Racing Fiberglass & Carbon Fiber Hoods: Buyer fully understands that all fiberglass & carbon fiber hoods or hoods made of similar lightweight materials are sold "as is" with no warranty expressed or implied, due to the fact all hoods are made of 100% fiberglass or a combination of fiberglass / carbon fiber. Most of these hoods are made in various local fiberglass factories, and also several are imported from Asia (Japan / China / Taiwan / Korea) which carry and set forth NO WARRANTIES whatsoever. Autobahn Motorsports is not responsible or liable for any damages or possible injury incurred upon possible accidents due to driver error, incorrect installations, bad judgment (cracking or breaking your hood) or act of nature / God, Allah, Jehovah, Buddah, etc.... All aftermarket lightweight racing hoods are intended and recommended only for off-highway use such as track racing or exhibition show only! Buyer understands that all hoods are lightweight aftermarket hoods and that these hoods are have no OEM specifications whatsoever. Most hoods come with stock latch and pre-tapped holes for easy installation. We strongly RECOMMEND that all customers purchase hood pins for safety reasons on ALL aftermarket lightweight racing hoods. Autobahn Motorsports supplies Sparco hood pins, or you may purchase hood pins at your local automotive retailer. We strongly recommend all customers only have a highly skilled professional body shop / technician install and paint any hoods (that require paint) for factory or show quality look. Not all body shops charge the same prices, or have the same quality work performed. We find that you get what you pay for! If any hood arrives damaged or cracked bad enough it cannot be repaired, you must contact Autobahn Motorsports immediately in order for claim to be processed and approved. Please refer to Shipping / Handling section of this page for further details involving claims. (Please continue to scroll down)
Condition of Sale: Please note that stock availability are subject to change without notice. The product images used on our website are for illustration purposes only and may vary from the product description.Returns: Authorization to return any and all products must be obtained by the Buyer from Autobahn Motorsports in advance and must be made within (5) days of receiving the product. All returned products to Autobahn Motorsports are subject to 30% restocking fee. Buyer must pay for all Shipping / Handling fees on any and all returns to Autobahn Motorsports. All products returned must be in the original manufacturers carton in the same condition as it was originally delivered by Autobahn Motorsports to the Buyer. Only the original Buyer may request for a return of products. All warranty cards and other such items must be included with the product being returned. Defective items may be exchanged for the same item only, and only after warranty has been cleared from original manufacturer will the Buyer receive product back. After receipt of goods, Autobahn Motorsports shall inspect the goods to determine the exact quantity and condition of goods received. If Autobahn Motorsports does not accept the goods as being defective and/or returnable for any reason, Buyer must accept incurred costs. Wheels and Tires which have been mounted or used are not returnable under any condition. Special Orders, Custom Made Orders, and all Electrical or Mechanical parts are not returnable. Fiberglass Fenders, Flares and Body Kits are also not returnable items under any circumstances.
Special Orders: All special orders require a minimum nonrefundable deposit of 50% of total costs. If there is any cancellation for any reason by the Buyer, that deposit is forfeited immediately to Autobahn Motorsports. Autobahn Motorsports shall not be responsible for any late shipments. All shipping dates given are approximate. Buyer shall not be entitled to chargebacks, reductions of price, or other offsets as result of late shipment or failure to deliver in estimated time of delivery. If special order item(s) are left over 60 days from time of Autobahn Motorsports receiving parts in stock; and Buyer has not paid the rest of his or her balance or made any attempt whatsoever to claim their order, then the order shall be considered canceled and all monies previously deposited shall be forfeited to Autobahn Motorsports.
6. Return Parts Authorization (RPA Policy)
We reserve the right to issue an RPA number based on the manufacturer product warranty to us. No return will be permitted on any products that has been abused or modified in any way, except by our Technical Department. Modification includes the removal of, or attempted modification to, any identification labels attached to the product at the time of purchase. ALL RETURNS MUST IN ORIGINAL PACKING CONTAINER, INCLUDING ORIGINAL PACKING MATERIALS, CABLES, MANUALS, ETC., AND MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL INVOICE, AND THE RPA NUMBER MUST BE CLEARLY MARKED ON THE SHIPPING CONTAINER, OTHERWISE THE RETURN MERCHANDISE SHIPMENT IS SUBJECT TO REFUSAL BY US. (The RPA # must be obtained from our Customer Service Department)
a. PRODUCT RETURN FOR DEFECT OR TECHNICAL REASONS - All request for return authorization due to defect or technical problems must be handled by our Customer Service Department, and must be authorized by the Customer Service Manager.
b. PRODUCT RETURN FOR NON-DEFECT OR NON-TECHNICAL REASONS - the Customer Service Manager must approve such returns. THESE RETURNS WILL BE ASSESSED A 30% RESTOCKING FEE, based on the original sale price. No refund after 14 days.
c. SHIPPING DAMAGE - We ship all product insured unless otherwise stated. If product is received damaged in shipment, a notation should be made on carrier delivery document and copy retained for return with the product. A report for damaged product must be requested within 24 hours or receipt of the damaged product.
d. SPECIAL ORDERS - Product which is "special ordered" will not be accepted for return.
e. ACTUAL SHIPPING CHARGES AND HANDLING FEES ARE NON-REFUNDABLE UNDER ANY CIRCUMSTANCES AND BUYER IS RESPONSIBLE FOR THE SHIPPING